astm a48

astm a48

  • astm a48 ASTM A48 / A48M - 03(2016) Standard Specification for Gray ...

    1.1 This specification covers gray iron castings intended for general engineering use where tensile strength is a major consideration. Castings are classified on the basis of the tensile strength of the iron in separately cast test bars.

    [More]
  • astm a48 ASTM A48 Standard for Gray Iron Castings - Iron foundry

    ASTM A48 Class 55 Min. Tensile Strength 55 ksi (379 Mpa) ASTM A48 Class 60 Min. Tensile Strength 60 ksi (414 Mpa) If you want to know the equal grades for other standards, please refer to Equivalent …

    [More]
  • astm a48 ASTM A48 Cast Iron - Grainger Industrial Supply

    ASTM A48 Stock up on cast iron rods at Grainger! Choose from Class 40 gray iron stock, ductile iron alloy 65-45-12 and alloy 80-55-06 in a wide range of sizes.

    [More]
  • astm a48 ASTM A48 - Instron

    ASTM A48 Standard Specification for Gray Iron Castings. To test Type A, B, or C gray iron following ASTM A48, use an Industrial Series 300LX load frame with split sleeve shouldered end specimen holders made for gray iron.

    [More]
  • astm a48 Gray Iron ASTM A48 Class 30 Data Sheet Penticton Foundry

    Sep 12, 2018 · ASTM A48 Class 30 (Related Standards – DIN GG20, BS 1452 Grade 220) is a gray cast iron. Gray iron consists of graphite flakes in a metallic matrix. When fractured, it is grayish in colour – hence the name (specifically, a fracture will follow along the graphite flakes which are gray).

    [More]
  • astm a48 ASTM A48/A48M - Engineering & Technical Information

    This specification covers gray iron castings intended for general engineering use where tensile strength is a major consideration. Castings are classified on the basis of …

    [More]
  • astm a48 Standard Specification for Gray Iron Castings1

    Gray Iron Castings, ASTM Specification A48, Class 30B. Gray Iron Castings, ASTM Specification A48, Class 40C. 5. Ordering Information 5.1 Orders for material to this specification shall include the following information 5.1.1 ASTM designation number and year of issue, 5.1.2 Class of iron required (see 4.1, Table 1, and Table 2),

    [More]
  • astm a48 MANHOLE CASTING REFERENCE GUIDE - Precast concrete

    All manufacturers should provide material certifications on product that includes country of origin and material quality and if requested, shall provide load test data on the casting. Gray Iron. Iron conforming to ASTM A48, Class 35B, as noted in section 7.1.1 and 7.1.3 of AASHTO M306.

    [More]
  • astm a48 ASTM International - Standards Worldwide

    ASTM Compass® Webinar. Join us for a FREE interactive webinar on June 20 th to learn how ASTM Compass® can help you and your organization stay current as standards are constantly updated.. Learn about exclusive tools inside Compass such as annotations, version comparison, and redlines. Get an in-depth knowledge about Digital Library, other publisher’s (AASHTO, AATCC, API, and UOP standards ...

    [More]
  • astm a48 Gray iron - Wikipedia

    Classifications. Class 80 is the highest class available, but it is extremely brittle. ASTM A247 is also commonly used to describe the graphite structure. Other ASTM standards that deal with gray iron include ASTM A126, ASTM A278, and ASTM A319.

    [More]
  • astm a48 ASTM A47 vs. A48 vs. A536 - Portland Bolt

    ASTM A47, A48, and A536 are all casting specifications. Each grade has its own strength requirements and base material used. Each grade is also commonly associated with a particular finished part that Portland Bolt stocks.

    [More]
  • astm a48 Gray Cast Iron, ASTM A 48 Class 40 - MatWeb

    Gray Cast Iron, ASTM A 48 Class 40 Categories Metal; Ferrous Metal; Cast Iron; Gray Cast Iron. Material Notes Carbon listed in the composition table is the total carbon.

    [More]
  • astm a48 ASTM A47 vs. A48 vs. A536 - Portland Bolt

    ASTM A48 covers gray iron castings intended for general use. A48 castings are supplied based solely on tensile strength where no chemical requirements or ductility is specified. A48 castings are supplied based solely on tensile strength where no chemical requirements or ductility is specified.

    [More]
  • astm a48 What is ASTM A48 Standard Specification for Gray Iron ...

    ASTM A48 Standard Specification for Gray Iron Castings. This specification covers gray iron castings intended for general engineering use where tensile strength is a major consideration. Casting are classified on the basis of the tensile strength of the iron in separately cast test bars. The surface of the casting shall be free of adhering sand,...

    [More]
  • astm a48 ASTM A48/A48M - Standard Specification for Gray Iron ...

    Dec 01, 2003 · Published by ASTM on August 1, 2016 These test methods cover the tension testing of metallic materials in any form at room temperature, specifically, the methods of determination of yield strength, yield point elongation, tensile...

    [More]
  • astm a48 ASTM A48/A48M-03 - Standard Specification for Gray Iron ...

    ASTM A48/A48M-03 Standard Specification for Gray Iron Castings. 1.1 This specification covers gray iron castings intended for general engineering use where tensile strength is a major consideration.

    [More]
  • astm a48 ASTM A48/A48M-03(2016) - Techstreet

    Full Description. 1.2 Castings produced to this specification are graded on the basis of minimum tensile strength obtained in special test coupons designed to standardize cooling rate. The tensile strength developed in certain casting sections may vary from test coupon values (see X1.2 ). 1.3 The values stated in either SI units or inch-pound units...

    [More]
  • astm a48 Astm A48, Astm A48 Suppliers and Manufacturers at …

    Storm Drain Cover ASTM A48 Class 30B. A wide variety of astm a48 options are available to you, such as iron, stainless steel. You can also choose from free samples. There are 177 astm a48 suppliers, mainly located in Asia. The top supplying countries are China (Mainland), Taiwan, and India, which supply 88%, 5%, and 4% of astm a48 respectively.

    [More]
  • astm a48 Gray Cast Iron, ASTM A 48 Class 40 - MatWeb

    Gray Cast Iron, ASTM A 48 Class 40 Categories Metal; Ferrous Metal; Cast Iron; Gray Cast Iron. Material Notes Carbon listed in the composition table is the total carbon. Can be oil quench hardened from 860°C to attain a Rockwell C 50 minimum surface hardness. Data provided by the manufacturer, Siltin Industries, Inc.

    [More]
  • astm a48 Dura-Bar ASTM Class 40 Is Engineered Iron That Offers ...

    Dura-Bar is an engineered iron that offers machining advantages over carbon and alloy steel as well as other continuous cast iron bars. Dura-Bar is a highly machinable material that allows manufacturers to increase profit margins by machining more parts per hour, thereby decreasing cycle …

    [More]
  • astm a48 List of ASTM International standards - Wikipedia

    ASTM F3046 Standard Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy for Surgical Implant Applications (UNS R56320) ASTM F3125 Standard Specification for High Strength Structural Bolts, Steel and Alloy Steel, Heat Treated, 120 ksi (830 MPa) and 150 ksi (1040 MPa) Minimum Tensile Strength, Inch and Metric Dimensions.

    [More]
  • astm a48 Gray iron - Wikipedia

    In the United States, the most commonly used classification for gray iron is ASTM International standard A48. This orders gray iron into classes which corresponds with its minimum tensile strength in thousands of pounds per square inch (ksi); e.g. class 20 gray iron has a …

    [More]
  • astm a48 ASTM A480 Plate Thickness & Flatness Tolerances - Rolled ...

    ASTM A480 Plate Thickness & Flatness Tolerances. * Thickness is measured along the longitudinal edges of the plate at least 3/8 in. [9.52mm], but not more than 3 in. [76.20 mm], from the edge. ** For plates up to 10 in. [254.0mm], excl, in thickness, the tolerance under the specified thickness is 0.010 in.

    [More]
  • astm a48 MATRIX IRON FOUNDRY

    Although A48 class 35 grey iron is a common material, and its application is very wide, but its total production volume is not large compared with other cast iron materials.

    [More]
  • astm a48 ASTM A48 - Instron

    ASTM A48 Standard Specification for Gray Iron Castings. To test Type A, B, or C gray iron following ASTM A48, use an Industrial Series 300LX load frame with split sleeve shouldered end specimen holders made for gray iron.

    [More]
  • astm a48 Ductile Iron ASTM A536 Grade 60-40-18 Data Sheet ...

    Nov 28, 2017 · This is a ductile iron ASTM A536 grade 60-40-18 data sheet. Included are composition notes, applications and physical and mechanical properties.

    [More]